Automatic assembly machine for high-pressure injection pump extension tube

4dhcpmingchen

Location Home -> Products -> Medical devices -> Automatic assembly machine for high-pressure injection pump extension tube

【Origin Pic】

[Back] [BACK]

[Previous] [Next]

Automatic assembly machine for high-pressure injection pump extension tube

Details

●Assemble and bond the outer cone joint, inner cone joint, one-wayvalve, conduit, and joint protective cap separately.
●UV adhesive is used at the junction of the catheter, and UV lightsource is used for curing.
●The catheter adopts an external coating method to ensure uniform coating.
●The assembly error of the end face of the conduit in place is+-0.5mm.
●Leak detection, identification of defective products.
●Compatible with various specifications and lengths of conduits.

Reference parameters

Dimensions of the machine（mm)	5500(L) x 2100(W) x1950(H)mm
Power supply (VIHz)	220V/50Hz
power（Kw）	13Kw
Air source(Mpa)	MPa0.5—0.8MPa
Control circuit voltage V(DC direct current)	DC24V
Noise standard (dB)	≤75-80dB
Operating environment requirements: temperature requirement	0-40℃,Humidity requirements：50-70%
Air consumption	10cubic meter/H
Production capacity	2000Set of/H